Princess Leia - Star Wars craft

Princess Leia joins the crew to celebrate Star Wars day!  She's made like the other figures, but the most important thing to get right was her rather distinctive hair style. Think we cracked it...

You'll need:

Egg carton

Pencil

Ruler

Craft scissors

Nail scissors or similar (optional) Adult supervision required

Paint

Craft glue
Plain paper

Black felt-tip or gel pen
Silver metallic pen

For a lightsaber:
Coloured straw

Black marker pen (like a Sharpie)

1. As with the other figures, roughly cut out two middle cones from the egg box so they're easier to work with. On one, draw a pencil line around the bottom of the cone, just above the bumpy cardboard joins. Cut along the line. This will be the body.

2. The second cone is for the head, and you only need the very top part. Either estimate this, or use a pencil and ruler to mark about 1.5cm (1/2in.) from the top on all sides, join the marks and cut out. A handy way to do this is to cut up two adjacent corners to the pencil line, bend the card back and cut off the flap - it should be easier now to cut along the rest of the line.

(If your cone has a hole in the top, see the tip at the bottom.)

3. For the arms, fold a piece of the egg carton lid in half and draw an arm (roughly about 3cm/or 1in. long) on the fold. Make it a little wider at the unfolded end. Cut out and open up.

4. Either cut the arm strip in half after the painting step (Step 7), and glue the pieces either side of the body, or, with adult supervision, use the nail scissors to make a hole roughly in the middle of one of the arm sides (keep the scissors closed, press down and twist from side to side.)
Once you've made the hole, snip up to the top of the cone and down the other side until the slot looks level. Cut an extra sliver out to widen the gap for the arms. Make sure the slot goes far enough down the body, so when you push the arm strip in, it sits below the top part of the cone (the head will be glued here later). Don't glue any of the pieces together just yet.

5. For her side buns, cut out a strip of plain paper, about 5cm by 8cm (2in.x3in.) and roll it as tightly as you can.

6. Then cut across your roll. Cut a few and make them as thin as you can. Choose two you're happy with, and gently squeeze them back into a rounder shape, letting them unfurl a little. Dab glue on the sides of Princess Leia's head and stick them in place. This might be easier to do with the head sitting on the body. 

7. Painting time. Take the head off and paint the body and arms white.

TIP: As with Darth Vader, place the body on a spare egg carton cone to make painting easier (and less messy!)

Make a skin colour by mixing white with a little red, a touch of yellow and the tiniest dab of blue. Paint one side of the head. When that's touch dry paint on brown hair, painting the buns too. It helps if you draw the outline of the hair on the face first with a brown or black pen before painting. 

Again, put the head on a spare egg carton cone while you're decorating it. 

9. When the paint is dry, use the fine black pen to draw on a face and if you have a silver pen add a belt (see pic above). Glue the head on and if you have cut the arm strip in half, glue them either side.

If you'd like to make a lightsaber or another type of weapon for Princess Leia, have a look at the steps for Luke Skywalker

Tip: If your egg cones have holes in the top, brush glue inside the cones and push a small piece of newspaper up to fill the hole.

Easy flower posy - Mother's Day crafts for kids

There are plenty of lovely flower crafts about at this time of year and we've tried quite a few, but I really like this one. Maybe because it's new to us, and new is always good, and maybe because you can get a great result quickly, with very little fuss. Just a toilet paper tube and some coloured tissue and you're on your way to a sweet bouquet!

Curly wurly snakes!

Wrap them wherever you like!

These spirally snakes are sssssssimple to make and they're really good for scissor practice too.

You'll need:
2 toilet paper tubes (or a kitchen paper tube cut in half)
Paint
Paper
Craft glue
Glue stick
Plain paper
Yellow felt-tip or highlighter

1.  Paint stripes up one tube using any colours you like. It looks good if you keep to a set pattern, so if you paint yellow, green then blue do the same around the rest of the tube. Try to keep the stripes a similar size.
On the second tube, paint the same colour pattern around the tube, leaving a space near one end. Make the stripes a little thinner this time. Paint the bit you've left black, or whatever colour you'd like for your snakes tongue! Paint the inside of this end black too.

2. When the paint's dry, carefully cut the tube to make a spiral. Take your time and make small snips with the tips of the scissors. Don't make the angle too steep at the beginning - just a gentle rise. When you've been round once, the important thing is to keep the width of the spiral (your snake's body) the same all the way up. Keep checking to see if it looks right. This can be tricky and needs concentration but it's great scissor practice. If it helps, you could try drawing a spiral on first with a pencil, or, for younger makers, start it off for them, as this is really the trickiest part. Let them have a go at cutting the rest of the spiral. It doesn't matter if it's a bit wiggly!

3. Snip the end off so you have a nice straight bit to stick the head to.

4. Use a pencil to draw a diamond shaped head on your other tube ( make sure it's not too small)

5. Use sticky tape to attach it to the twisty body.

6. Cut out an eye shape from the spare tube. We tried two different shapes. Draw around it twice on some plain paper and colour in with a yellow felt-tip pen or a highlighter. Add a black pen line down the middle. Cut them out and use a glue stick to glue them to the head.

7. Cut a thin strip from the black end of the tube for your snake's tongue. Straighten off both ends and cut a 'V' in one of them.

8. Use sticky tape or glue to stick the tongue to the back of the head. Add two black nostrils and any other detail you like. Now your snake is ready to explore!

Easy bunny project from 'Make your own farm animals'

Looking for something crafty to do with the kids over the hols? What about making a farm? All the projects in this book are simple to follow, and they use easy to get hold of cardboard bits and bobs, like egg cartons, cereal packets and tubes - so you should have just about everything you need to get started..

None of the book projects have made an appearance on the blog yet, so, as it's a kind of bunny time of year, thought I'd share this one :)

You'll need:
Egg carton
Pencil
Ruler
Red, yellow, blue and white paint
Fine paintbrush
Kids' craft scissors
Craft glue
Black felt-tip or gel pen
Cotton wool ball

1 Roughly cut out a whole middle cone from the egg carton so it's easier to work with.

2. Use a pencil and ruler to measure and mark 2cm (3/4in.) from the top on one side of the cone, and draw a line across here. On the opposite side, measure and mark 3cm (11/4in.) from the top and draw another line.
Join them with sloping lines either side.

3. Cut out your bunny's body. A handy way to do this is to snip up two adjacent cone corners to the pencil line, then fold back the flap and cut it off - now it's easier to cut along the rest of the line.

4. For the ears, draw a petal shape on card from the egg carton lid. As a guide - make it no more than about 4cm (11/2in.) long and not too wide. Cut this out. If you want to make more bunnies, you could keep it to use as a template to draw around.

5. To form the ears, draw a long, slightly curvy 'V' in the middle of your petal shape - don't take it down as far as the pointy end. Snip out the card piece between the ears.

6. Brush glue on the bottom part of the ears and stick them just behind the top of the cone (on the longer cone side).

7. When the glue's dry, pinch hold of the cone where the ears are attached and bend the ears back. Paint the bunny whatever colour you like, remembering to paint both sides of the ears. This brown colour is made by mixing yellow with a little red and a dab of blue - lighten with some white.

8. When it's touch dry, use a fine paint brush to add a white fluffy chest, then mix a touch of red with the white to make pink and paint a stripe inside each ear.

9. For the tail, pull off a small amount of cotton wool, roll it between into a little ball between your finger and thumb and glue to the back of your bunny near the base.Use a black felt-tip or gel pen to draw a face. Do the twitchy nose first, right on the edge of the cone top and add the eyes just above.

TIP: If your egg carton has cones with holes in the top, brush some glue inside them and push a little scrunched up ball of newspaper up, to fill the hole.

There are some good deals on Amazon, and noticed 'Make your own farm animals is only £3.99 on the UK Book People site at the moment. Free postage too if you spend over £25.

Cork crafts with a twist for Easter

I'm not sure where this idea came from... but hey, why not a chick on an Easter bonnet or a cat on a hat?? Probably has something to do with the amount of time I've spent looking at corks! I wanted to come up with a quick project that involved simple painting and was possibly a bit quirky? The bottom part of the cork below the rounded top just made me think HAT.

You'll need:
Cork (from something fizzy)
Paint
Coloured paper
Craft glue
Glue stick
Pencil
Spice jar to draw around
3 feathers (for the chick)
Small stickers/sequins (optional)
Spare card (for the cat)
Black felt-tip or gel pen


1. First, paint the rounded top part of the cork yellow for the chick, then decide what colour hat you want, and paint the bottom part. You could paint it the same colour as the paper for the hat rim (like we did) or make it completely different.

2. For the rim of the hat, find a circle shape that's bigger than the bottom of the cork (we used a small spice jar), draw around it with a pencil and cut out. Cut a thin strip of paper for a hat band.

3. Put a thin layer of glue on the hat band strip (a glue stick is best for this) and wrap it around the bottom of the cork - don't worry if it doesn't go all the way around (like ours) - the gap can be covered by the rim of the hat. Glue the bottom of the cork to the paper circle - place it a little off centre, and then glue the wider part of the rim to the side of the cork to make a turn up. If you need to, lean a book on the hat turn up while it dries.

4. To decorate, we made little paper flowers, but if you have some pretty small stickers or shiny sequins these would be an easier option and would look so lovely too.

(To make the paper flowers, cut a very small square of paper, fold it in half then half again. It helps if you draw a petal shape on top, starting from the corner that's the middle of the square (centre of your flower). Do a few practice ones - sometimes they can end up looking more like butterflies, which is good too! Cut out a circle for the middle, or use a hole punch to make circles, or paint the centre)

5. Use a black felt tip or gel pen to draw eyes on your chick, near the top, and straight above the hat turn-up.

6. Cut a small orange triangle for the beak (if you don't have orange paper, colour in some plain paper or draw a beak straight onto your chick with an orange felt-tip). Dab the tiniest bit of glue just below the eyes (or use a glue stick), wet your finger to pick up the tiny beak and stick it in place.

7. Glue feathers either side, for the wings.

- and, if you want, add a head plume. Make a hole on top, near the front, just above the eyes, using a small screw (screw it in until the hole is deep enough) - put some glue on the bottom of the feather and push it into the hole.

8. For the Cat, follow the instructions above to Step 4, making sure you also paint a small piece of spare card (or paper) the same colour as your cat's body (for the tail and ears).


9. When the paint's dry, draw and cut out a tail and a small square (that will be the ears) - make sure it's no wider than the top of the cork.

10. Fold the small square in half and on one side of the fold line, draw pointy ears. Carefully cut around them, bending the piece between the ears back so it's easier to snip off.

11. Glue the bottom part of the folded ear piece to the top of the cork, straight above the hat turn-up.

12. Use a black felt-tip or gel pen to add the face detail and then paint a lighter shade on the cat's tummy.

Now's the time to paint on pen on more detail if you like. We added some stripes (don't forget to paint them on the tail too!), but leave your cat plain if you prefer.

13. Glue the tail in place so it wraps around the front.

Let me know if you have any other thoughts about what to put on the hat!!