Egg carton turtle and babies - #stayathomecrafts

 Another craft that uses the whole egg carton, and makes a perfect home for the little turtle babies!

You will need:
2 egg cartons
Cereal box card
Craft glue
Paint
Black pen
Nail scissors (optional, to be used by an adult)

1. With green paint and a big brush, paint the outside of an egg carton, the cereal box card and the bottom of the egg cups from the second carton.

2. Squirt some red and some yellow paint on a plate or palette, and mix them in the middle to make orange, then have fun splodging on yellow and orange on your turtle and baby turtle's shells, and dab on a little red with finger tips. Messy and fun!
We got a bit carried away, so added a few more blobs of green on top, to break up the bright colours.

3. For the big turtle's head, cut a strip from the green card, about 4cm wide. Cut it so it's about 6cm long and round off one end.

4. For the back legs, cut a strip about 3cm wide, cut two pieces from either end of the strip, about 5cm long. and round off one end of each.

5. For the front flippers, use a decent sized cup or glass and draw around the rim. Cut out the circle and and cut the circle in half.

6. Cut away the middle part of the semi circle - use a pencil to draw this first, if it helps.

7.  Then round off one end of each flipper, but make sure you round OPPOSITE ends, so the flippers can go either side of the turtle's head.

8.  Glue the legs inside the carton at one end, on or near the corners.

9.  Use a black pen to draw the face on the head part, and either glue this in the middle of the other end and glue the flippers on top of it, or flippers first and head on top. Whatever's easier.

If the flipper doesn't go far enough down the side that's attached to the lid, cut the connecting card a little and slot the flipper in.

10. The baby turtles or turtlettes, are made in a very similar way. Cut out as many egg carton cups as you want. For a quick finish, cut a strip for the head, snip into 2cm lengths and round one end. Draw on a face. Either glue the end of the head piece inside the 'shell'. When dry fold into place, OR, make a hole in the side of the carton cup, about half way up (to be done by a adult - keep nail scissors closed, press down and twist from side to side. It helps if you put a piece of modelling clay behind where you're making the hole, so there's something to press into)

Once you've pierced through, make a slot for the head and push it into place.

These babies will look sweet as they are, but if you would like to add legs, cut a thin strip for the back legs, cut off small pieces, about 2cm long and round ends.

For the flippers, draw around something small, like a  thread spool or small spice jar - cut out the circle, and cut the circle in half. Cut away the middle of each semi circle and round one end of each, making sure they're opposite ends, and glue the ends under the turtle's shell. When dry, fold out.

When the babies get tired of swimming, they can always have a little rest under Mum's shell..

The Big Blue Egg Carton Whale - #stayathomecrafts

This is a great craft because it's more than just a whale! It's somewhere to keep tiny treasures,  or pieces for simple games you can play with your little ones.

You will need:
An egg carton
Cereal box card
Craft glue
Scissors
Paint
Black marker pen
Plain paper
Nail scissors (*to be used by an adult)

1. The first thing you need to do is paint your egg carton. We used ordinary ready-mixed poster paints. Add some white paint to the blue as this helps cover up any print and pictures on the box.

Paint some spare cereal box card blue too, for the tail and fins. We painted the bottom half of the egg carton a lighter blue, but it doesn't look very different in the pictures!

2. You could cut the tail out freehand, but we decided to make a template - fold a piece of thin card or paper and draw half a tail on the fold, then open up. Make it long enough so there's plenty of card to glue inside the egg carton. We cut a triangle shape template for the fins.

3. For the mouth, carefully run a brush with some black paint along the bottom edge at the head end (see photo below) Take it around both corners of the carton so you get a nice wide smile. When the paint is dry use a black pen to finish off, lifting the corners of the mouth, so there's a happy grin. Add eyes too or use googly eyes if you prefer.

4. Glue one fin just under the front edge of the lid, near the eye, and at the back, snip along the cardboard hinge join, just enough so you can slot in the second fin.

5. For the water spray, take a piece of plain paper, about 8cm wide and 16cm long, and roll it into a tube. Don't make it too tight - you want to be able to get the arm of your scissors inside the tube. Dab a little glue on the end corner  or edge of the paper, to hold the tube together. Then cut about halfway down the tube, at roughly even spaced intervals, and all the way around.

6. Find a strand of paper right in the middle of the tube and give it a gentle tug, to pull it up a little. Don't pull too hard though, as you don't want the inside to pop out completely. (This part reminds me of making palm trees from newspaper tubes, do you ever remember doing that?) Splay out the paper strands a little by pressing down lightly with your hand. This makes it look a bit more splashy!

7. Use something like nail scissors* to make a hole for the spray on top of your whale. (Keep the scissors closed, press down and twist from side to side) Then cut a cross that's a little bigger than the width of your paper tube, and push through the card with your finger. Brush a little glue in the hole and push the spray into it.

8. If you'd like to make some waves, squirt some blue, green and white paint onto a plate or palette and use a big brush to mix and swirl the colours together - this is great fun and looks really effective.

Cut some wavy lines and fold each piece roughly in half to prop them up.

There are all kinds of things you could put inside your whale. We made some little pine cone fish and painted them lots of bright colours. You could use them to help your little ones learn colours, or help with counting.

Father Christmas potato print

Really enjoyed potato printing at Halloween, so thought we'd make some festive ones!

And we've stuck to simple shapes again.

First, cut a potato in half and slice a thin sliver off the bottom, so it sits flat and is easier to work with.

Use a ruler and a sharp pencil to score a triangle - start with the base line of the triangle and take it right to the edges. Roughly mark the midpoint of the base line at the top of the potato, and score lines up to this mark.

You could draw the triangle on first with a pen if you want, and then score. 

Don't make your triangle too fat and wide.

Use some kitchen roll to remove little potato bits and moisture.

Score a line across your triangle, near the top, to define the hat, and then another one just below for the face. Use your thumb nails to pinch off a sliver of the face strip, either side, so it's not quite a wide as the hat brim.

Below the face, score an upside down triangle for the beard.

Cut away the sides of the triangle and your Santa is ready!

TIP: (To be done by an adult) Cut two wedges away, either side, at back, leaving a ridge of potato in the middle to hold onto. A sort of potato handle! Easier for little hands.

Brush pink paint on the thin face strip and red on the hat and body. Leave the beard clear.

When the paint is dry, use a black pen to draw on eyes and buttons.

Try some practice prints first, and when you're happy with the paint quantity, why not design your own Christmas paper or gift tags?

Add in a Christmas tree too if you want - another triangle, with a small square at the bottom. You could cut out a triangle and separate small square if you prefer.

Egg carton bunny burrow bank!

This little bank of burrows is great fun to play with and a handy place to keep your egg carton bunnies.

You'll find the bunny project HERE.

For the rabbit warren, snip the middle cones off inside the carton and use cotton wool or fold some kitchen roll to make it cosy inside. Paint the outside green.

While that's drying, cut an egg cup from another egg carton, and trim above any cardboard joins or gaps, so you end up with a short cup. This is going to be the tree stump.

Make up a brown colour (mix yellow and red, then add a dab or two of blue), add a little to some white to make light brown and paint the top of the stump. Use the brown to paint the around the side, plus a little around the top edge.

Cut a strip of green paper, about 2cm wide, long enough to wrap around about two thirds of the bottom of your stump.

Fold it in half longways, and snip zigzags along one side, up to the fold, for the grass.

On the other side of the fold make a few snips along the strip - this makes it easier to glue under the edge of the egg carton. Brush glue along the edge and inside the egg cup, and press the paper into it.

Make some burrows in your egg carton bunny bank (we used nail scissors to pierce a hole - keep them closed, press down and twist from side to side - then cut a burrow.

Glue the tree stump in place and add some bunnies!