How to make the gnomes from Brian the Lion

It's the gnomes turn to take centre stage!

There's already a Brian the Lion tutorial here, and this project shows you how to make the little blue, beardy gnomes that Brian meets during his adventures in my book, 'Brian the Lion goes into Space.'
They're very simple to do - just corks and cotton wool!

You will need:
Cork (wine cork shape or cava/champagne shape)
Paint
Scissors
Blue paper (or plain paper coloured blue)
Cotton wool
Glue stick
PVA craft glue
Black felt-tip pen or gel pen

1. First, paint your cork light blue (mix a little blue with a lot of white) The champagne style corks have an obvious head shape.

2. Cut a strip of blue paper (or colour-in plain paper) Make it few cm's wide, so it's about half the length of the cork. Cut a piece that's long enough to wrap around the cork with a little overlap.

3. If you have a glue stick, rub this over your strip of paper and glue in place. With craft (pva) glue, it might be easier to brush a thin layer on the bottom half of the cork and wrap your paper piece around it, adding a tiny dab more glue where the paper overlaps.

4. Cut another thinner strip for the arms - it needs to go around the back of the cork with the arm length even on both sides. You can round off the strip ends for hands if you want, or leave them as they are. Glue in place.

5. For the gnome's shoes, place the cork on the paper and draw around it, but extend your circle shape out a bit at the front (see pic)

Cut out, and mark a 'V' shape in the middle of extra front bit that sticks out, to define the shoes. Snip out the 'V'. Glue the rest under the cork.

6. For the gnome's beard, take a small piece of cotton wool - we unwrapped a cotton ball and used one end of it. Decide how long you want your gnome's beard to be, then gently pull a hole in the cotton wool just above your chosen beard size.

7. Brush a layer of craft glue over the top and sides of the gnome's head and a little on his front, below his head, but leave a space for his face. Carefully press the cotton wool into place, around the face. Try not to get glue on your hands or his beard will stick to your fingers! Gently tease the cotton wool down at the back and sides, to cover the head, and cut any extra off. Press and trim the front too, until you're happy.

For the gnome's hat, draw around something like the base of a small glass, or jar or beaker, and cut the circle out. Fold it in half and cut along the crease. Rub or dab some glue along half the straight edge and carefully fold and bring the sides together to make a small cone shape. Press with your fingers until the glue holds.

You could glue the hat on, or leave it, so your gnome can take a nap.

Because of course, they sleep on their heads...

Poppy egg carton craft for Remembrance Day

This craft project is close to my heart. As an army wife I can't think about Remembrance Day without getting a lump in my throat. Such a mix of emotions, as we honour those who died in the First and Second World Wars and all the conflicts since, and I remember family and friends in the Forces. Some here, some not.

These poppies are made from egg cartons, and I've gone for three petals instead of four because I thought they looked more poppy-like. I've added a little paper centre too, for the spikey stamens, but you can leave this part out if you like.

You will need:

Egg carton
Scissors
Pencil
Craft glue (we used PVA)
Paint
Black paper (optional)
Paper plate (for the wreath)

Egg cartons come in all shapes and sizes and this does make a difference when you're trying to make flowers.

If the cups are nice and round, then it's easy enough to cut one out like this, with an neat edge and make three, roughly evenly spaced marks, for the gaps between the petals.

The thing is, most egg carton won't have nice round cups, they'll probably look a bit more like this when you cut them out, with a split where the cup joined the middle part of the carton.

So, we're going to work with the split, and incorporate it into our poppy, by using it as one of our three marks, adding two more so they'll all as evenly spaced as possible. (Cut off the rough edges at the top if they're in the way.)

With the scissors, cut down to the base of the egg cup where you've made your two marks.

Then cut and gently curve each of the three petals.

Carefully round off the edges of each petal by snipping the corners. And then very gently, while holding the flower in the middle, carefully push the petals back. This needs to be done with care or the cardboard can rip.

In the picture below I'm snipping off the corners of the round neat shaped egg carton cup.

In the end the round egg carton cup and the one with the splits look pretty similar!

Paint your poppies, remember to do the back of the petals as well, and add a black blob in the middle - this looks much better and more natural if it's a bit irregular, and not too perfect and round.

To make the wreath, paint the rim of a paper plate green. When it's dry, make a hole in the centre of the plate (best done by an adult) and cut out the middle section.

This next step is optional as the poppies look lovely as they are, but the little paper stamens gives them a bit more detail.
Cut a strip of black paper about 0.5-1cm wide and cut into 5cm pieces.

Roll one of the short pieces up, then open it and snip a fringe along one side - roll it up again, but loosely this time.

Brush a good layer of glue in the middle of black centre of your poppy and add the rolled up paper. Let it unfurl a little, but make sure it stays in the glue. Give it a light press and then leave your poppy to dry.

Once dry, press the fringed paper out with your finger. We made 15 poppies for our wreath.

Make a hole in your paper plate wreath and thread through some string so you can hang it up.  Then glue on your poppies.

Pop-up matchboxes

I love a matchbox - any tiny box really, and I bought a job-lot of them for a pound in Home Bargains the other day. I've been wanting to try a simple pop-up matchbox idea, and Halloween seemed like the perfect time!

It took a few attempts to work out where to cut and where to stick... but we got there in the end! And once you've made the pop-up mechanism, you can add any ghostly, ghastly ghoul you like..


1. Rather handily, our matchbox had lines on it already, but basically you need to draw two lines, a few cms apart, down the middle of your box top.

Take them really close to one end, and draw a line across (this is important! See above), leaving the other open (about 0.5cm from the edge). We've coloured this open end with the black pen so it's a bit easier to see which end's which. (And this black mark will become dracula's shoes later!)

2. Adult help is needed for this next part - use some nail scissors or similar to pierce a hole through the line on the matchbox top (keep the scissors closed, press down firmly and twist from side to side). Once you've pierced through, cut carefully along the 3 lines you've drawn, leaving the end with the space (or the thick black mark in the picture).

3. Fold this flap of card right back and press firmly.

4. Then fold the flap of card in half and press the crease firmly again.

5. Cut a strip of paper, about the same width as the card strip, and roughly 4cm long.

6. Glue a good section of it under the card flap and let the glue dry.


7. Now the more fiddly bit, because you need to glue the other end of the paper strip to the end of the matchbox drawer.

Take the match box drawer out of the cover and dab some glue at the end and bottom of the cardboard drawer. Then push it back in from the thick black mark side (not the paper strip side), gluey end first, until it's half in, and

Take the match box drawer out of the cover and dab some glue at one end of the cardboard drawer (end side and bottom). Then gluey end first, push it back in from the thick black mark side (not the paper strip side), until it's half in, and you can see the gluey end through the hole in the top of the matchbox cover.

8. You need to stick the paper strip to the glue, this is tricky, so we used the end of a pencil to push the paper strip into the glue (end side and bottom).

It is really important to get the cardboard strip as close as you can to the edge of the drawer - there should be a small gap, but it must be small, or the mechanism won't pull back properly. (See how close it is in the photo. We've drawn a black line along the top edge of the matchbox drawer, so you can see how close it is to the edge of card strip.)

9. Once it's dry you can try out your pop-up box! When you push the drawer back into the cover,  the middle section should go flat. If it doesn't, then the card strip needs to be glued closer to the end of the drawer. If the box is too tight and won't shut properly then the card strip has been glued too close to the end of the drawer and needs more of a gap.

11. Draw your Halloween figure on some paper - make it roughly the same size as the matchbox.

12. Make sure the matchbox is open so the mechanism is sticking up, and glue your ghoul to the side of the folded card strip that isn't attached to the paper strip, lining up the bottom edge of your figure with the crease.

 13. To make an easy pop-up match box surprise, cut a thin strip of cereal box card or similar and fold it a few times to make a spring mechanism. Glue or stick this inside the drawer part of the matchbox, near one end. Draw your bat, spider or ghost or whatever you like and glue to the top of your cardboard spring. We also made a ghost from some tissue paper!

You could decorate the matchbo too - draw around the box on some paper, and design a spooky cover! Cut out and glue on top of the matchbox.