Brian the Lion paper plate and mask - World Book Day

This is a very quick and easy paper plate craft that works perfectly well with my book, 'Brian the Lion goes into Space'. You can either leave it as a paper plate picture or make it into a mask. Could be handy with World Book Day around the corner!

You will need:

Large paper plate

Paint

A bowl/side plate

Scissors

Black pen (like a Sharpie)

Nail scissors (optional - adult supervision needed)

Elastic (optional)

Old pair of glasses frames (optional)

Sticky tape (optional)

1. Paint the centre of the plate yellow, all the way up to the bumpy rim - it really doesn't need to be neat!

2. Once the yellow has dried a bit, find a bowl or side plate that covers most of the centre of the paper plate. Then, keep your hand on the bowl or plate while painting the brown mane around it. Make sure to go right up to the edge of the bowl. (Make brown by mixing a little red with yellow and adding a dab of blue until you're happy with the shade). Don't be tempted to take the bowl or plate off too quickly!

3. Once dry, remove the bowl and you should have a lovely, crisp yellow circle.

Now it's time to cut the mane. First, make two cuts opposite each other, just up to the edge of the yellow circle.

 4. Then make another two cuts opposite each other, halfway between the ones you've just made.

5. Keep snipping halfway between your cuts, and work all the way around, until the cuts get closer together and you're happy with your mane. Doing the cutting like this keeps the mane even - it is also good scissor practice and it helps kids start to make judgements about space and distance.

6. Use a black pen like a Sharpie to draw on Brian's face. As a guide, the eyes here are about 6/7cm a part.

7. If you want to make him into a paper plate mask, then a grown up with have to make holes through the eyes with nail scissors. It helps to put some modelling clay behind the eyes, so there's something to push into. (Keep the scissors closed, press down and twist from side to side.) Make the holes a decent size, so it's easy to see out. You could make some slits in the nose too, if you want to.

8. I think the best way is to use sticky tape to stick an old glasses frame to the back of the mask. Very quick to do! And it keeps the mask nice and flat when you wear it.

9. You could attach some elastic to the mask instead, but the sides will tend to bend around the wearer's head.

Make holes at the side of his face, close to or just inside the mane. I found some of my son's paper reinforcement stickers and stuck them around the holes at the back.

Once you've knotted and tied the elastic to one side, get the mask wearer to hold it to their face while you gauge how much elastic you need on the other side. Hold the elastic at the chosen spot, and mark with black pen. Now thread it through the hole, tying a knot or two on or as near as possible to your black mark.
We painted over the knots on the front, so you don't see them so clearly.

 Think the mask would look better on a smaller child! Mine are all getting so big now..

Oink! the Pig - TP roll crafts for kids

Oink is very similar to Scamp the dog. I love the way they look like they're on the move! 

Made from a single toilet paper roll that's quickly transformed with a few careful cuts and folds, plus a little bit of glue.

You will need:

Toilet paper roll (about 10cm long)

Scissors

Pencil

Ruler

Paint (white and red)

Craft glue

Paper clip or similar

Black felt tip or gel pen

1. Paint a toilet paper roll pink (plenty of white an a little red). Paint the inside too, at both ends, as well as a small piece of spare card (for a snout). 

When the paint is dry, lightly press the cardboard tube flat, but no need to press firmly along the creases. The creases are  mainly for guidance.

2. Line up the two creases you've just made in the middle, and press the tube flat again, but not too hard, so you end up with four evenly spaced, light creases.

3. While the tube's still flat, use a ruler and pencil to mark 2cms in from each end along the middle crease. Then use this mark as a guide to mark the two creases either side. And finally the one on the back.

4. Cut up to the marks, so you'll have four cuts at each end.

5.  For the legs, fold two opposite end flaps down, and cut a thin, long triangle from the middle of the flaps, to define the legs.

6. For the tail end, cut a top flap into three strips. Leave the middle one (for the tail) and bend the other two down.

7.  Fold the side flaps inwards, and glue them together. Use a paper clip or something similar to hold the card in place while the glue dries. Trim the card flaps if you need to, to neaten things up.

8. Roll the card tail between your fingers, from the end, right down to the pig's back, to make it curl.

9.  For the ears, fold the top flap at the other end, so it points up and cut out a triangle, from each corner to the middle of the flap.

10. For the face, fold the two remaining side flaps right back. 

11. Then fold each of these flaps in half and firmly press the creases.

Bend the flaps back towards each other.

12.  Glue the flaps on top of each other and use a paper clip to hold them in place while the glue dries. 

13. When the glue has set, you could draw on a snout and eyes straight away. Or, cut out a round snout from the spare piece of painted pink card, add nostrils and glue in place. Draw eyes either side with the black pen. Shorten the legs and bend the ears forward.

14. And Oink is ready to scamper off! 

Raining hearts - Valentine's craft for kids

There really is no end to what you can do with cardboard tubes! They're so amazingly versatile - just look at these little hearts. Made from slices of toilet paper rolls simply squeezed into shape. Very satisfying and quick to do, and perfect for Valentine's Day.

You will need:
Toilet paper rolls (or kitchen paper rolls)
Paint
Scissors
String/yarn and a needle
White card (or painted cereal box card)
Sticking tape
Cotton wool (optional)

1. Choose colours for your hearts and start painting. Paint the inside as well as the outside of the tube. And if you're only making a few hearts in each colour, there's no need to paint the whole tube. (You could paint each end different colours if you only have a few tubes spare)

2. When the paint is dry, flatten the tubes with the palm of your hand and press along the two creases.

3. Cut across the flattened tubes, and make each slice roughly about a cm wide.

4. Cut a cloud shape from some white card or cereal box card (ours is about 28cm/11in. wide)

5. To make the heart shape, pinch one of the creases (see pic below) and push the other crease down, towards it, then give this crease a good pinch while you press the top part of the heart into shape with your fingers. Takes a bit of practice, but once you've got the hang of it you'll be making them in a flash.

*We have threaded our hearts together, which needs to be done by a grown up, but if you'd rather not do this, you could stick the hearts onto long strips of paper instead.*

6. We used some white yarn and a needle, and threaded it down through the middle of the heart at the top (leave a good tail to attach to the back of the cloud), and then through the point at the bottom. 

(Use modelling clay to push against, if you're finding it hard to make holes in the card)

We threaded three yellow, green, blue and orange hearts on separate strings and four red ones.

7. When you're finished, tie a knot below the bottom heart, and make sure your hearts are spaced out evenly along the yarn (remember to leave a good tail to stick behind the cloud) 

8. Use sticky tape to attach the threaded hearts to the back of the cloud. To help with spacing the strings evenly, stick down the ones at each end first (blue and green here), then stick the red hearts halfway between, before adding the other two either side.

9. Covering the cloud with cotton wool looks great too. Make sure you tease it out though, so it doesn't look too lumpy.