Eric Carle inspired Butterfly! (and cocoon)

This project was inspired by an Eric Carle Instagram craft challenge - they're so great for coming up with new ideas! It's a very simple project - younger makers will need some help with the folding and cutting. I've laid out a simplified pattern for Eric Carle's butterfly, but feel free to design your own butterfly!

You will need:

A4 sheet of plain paper

Paints

Two pipe cleaners

Small plastic bottle and cut up pieces of newspaper for the Cocoon

1. First, fold your piece of paper in half lengthways, then fold each half into the middle, open up and you should have four evenly spaced creases.

2. For our Eric Carle inspired butterfly, we used the creases as a guide to paint a purple, then green, then greeny-blue, followed by a blue stripe. We used poster paints and watered them down so they were more of a wash, and went on quickly with a big brush. (I often use a pastry brush, great for painting bigger areas quickly)

We painted the back the same way too, but this really is optional.

3. Once dry, fold the piece of paper in half the other way, so you can clearly see the middle of your butterfly.

We then used thick yellow poster paint to splodge on two round shapes at either end of the purple stripe, and yellow lines between the purple and green, the blue and greeny-blue stripe, and a thick one across the middle of the greeny-blue stripe. Then three dots on either edge of the green stripe.

4. We added a few dots at the top of the blue stripe, then mixed a little red into the yellow for some orange dots on either edge of the greeny-blue stripe.

5. Next, red circles in the corners and small dots in the middle of the orange ones. A red line and a dot on half of the bottom yellow line, and another dot above it on the greeny-blue stripe. Add a dab of orange to the top red circles.

6. Then thick purple lines in the middle of the green and the blue stripes, plus purple dots in the bottom circles. Last but not least a short green line in the middle of the purple stripe and some green dots at either end of the top purple line.

7. When dry, start folding or pleating your piece of painted paper longways, as if you're making a fan. If you're crafting with little ones, maybe make the pleats bigger, so they can be more involved with the folding.

8. In order for the pipe cleaner to be wrapped around the centre of your butterfly more easily, you need to cut a triangle from the middle of your fan - making sure you don't cut all the way through! Aim for a small triangle that's at least half the width of your folds. Make sure you cut it on the non-decorated side too.

Cutting through the paper fan can be hard, so best done by an adult.

9. Pipe cleaner time! We made some antennae with a piece of black pipe cleaner and then used a whole yellow one and made a hook shape at one end (the length we wanted our butterfly's body to be).

10. Hook it over the antennae, then hook the whole thing over the centre of your butterfly wings.

11. Start wrapping the rest of the pipe cleaner tightly around the body, and then over and around the wings to secure them. Wrap the remaining part of the pipe cleaner around the head part, so the antennae are secure too.

12. We wrapped a small piece of red pipe cleaner around the top part to keep our butterfly looking as EC as possible, but this is totally up to you. Dot on eyes with a black marker pen.

13. For the cocoon, you need a small plastic bottle that's at least as tall as the length of one of the butterfly wings.

Cut up some newspaper, water down some PVA (craft) glue, soak the paper pieces in the watery glue and cover the bottle in papier mache. Messy but fun! It really doesn't need to be neat.


14. Once dry, paint it brown, orange and yellow stripes. Have the colours on one plate and let them mix together a bit, so you get a mix of colours in the stripes, and they meld into each other.

Brian the Lion

What can I say about Brian? He was the first cardboard tube animal I made with my daughter, and I've always had a soft spot for him.  He really kicked off the whole Zoo and Farm craft journey, so I couldn't be happier he now has his very own picture book.

'Brian the Lion goes into Space' is a colourful, wacky space adventure, with some fun twists and turns along the way.. There are lots of little beardy blue gnomes, rainbow food, oh, and a friendly dragon called Norris.. 

The gnomes want to read Brian's new book!

The book combines storytelling and craft, as Brian's world is made out of cardboard (of course).. 

All the picture scenes in the book are created from ordinary packaging like egg cartons, tubes and cereal boxes. Plenty of familiar things for kids to spot, and hopefully it'll inspire some making too! The book is available on Amazon.

I have shared a Brian project before, quite a long time ago now.. so, in honour of his first book, I've updated it here.

You will need:

Toilet paper tube (or kitchen paper roll)

Cereal box card

A cup/beaker and egg cup/spice jar or similar, to draw around

Craft glue

Scissors

Ruler

Pencil

Yellow and Brown paint (mix a little red with yellow and a dab of blue)

Black felt-tip or gel pen

Paper clips

1. Paint the tube and some cereal box card yellow (enough for the face, tail and paws) and paint another piece of card brown (enough for the mane). 

Painting first can speed up the making (if your mini maker doesn't mind a short wait at the start..), but in MYOZ we got stuck in straight away, cutting and gluing the body first, and then painting, which is fine too!

2. When the paint is dry, cut the tube so it's about 8cm high. An easy way to do this is to use a ruler to  mark 8cm on the side, then squeeze the tube flat, near the mark, and cut across, cutting through the mark (younger ones might need some help cutting through the double card).

3. Squeeze the top part of your tube together again, and give Brian some shoulders by snipping little triangles off the sides. Don't take too much off.

4. Brush some glue all along the inside edges of the end you've just cut. Don't overload with glue or it will ooze out everywhere when you squeeze the glued sides together.

Use two paper clips to keep the sides together while the glue dries.

5. Time to make Brian's head. On the brown card, use a pencil to draw around a big circle, like the top of a cup or beaker - and draw around a small circle, like an egg cup or spice jar on the yellow card. Carefully cut these out. (slowly turn the card circle towards you as you cut, rather than moving or turning the scissors.)

6. Place the smaller yellow circle in the middle of the brown one, and when you're happy, lightly draw around it and put aside.

(*see tip below for younger makers) 

7. For his mane, the best and easiest way to keep it even, is to cut up to the pencil line and then make a cut opposite the one you've just made.

Halfway between them, make another cut on both sides. 

Keep cutting halfway between all your cuts until you feel his mane is full enough. (Don't worry if you cut over the pencil line, this will be covered up by the face in a moment)

8. Draw on Brian's face with a black pen. Brush a thin layer of glue on the back of the face and place it in the pencil circle on the mane. Make sure you don't use too much glue or it will squidge out the sides!

9. From the spare yellow card, cut a thin strip for a tail and cut out two paws. (You could make a paw template first, then draw around it to keep your paws the same size). 

We cut out a little brown piece to glue onto the end of the tail too, but leave it plain if you want, or colour in the end with a pen. Add some claws to the paws.

10. Glue the paws on, again, just use a little glue, and make sure they don't hang over the edge of the tube. Dab some glue on the plain end of the tail strip (painted side) and stick it at the back, inside the tube (you can bend it into place when the glue has dried).

Finally, remove the paper clips and glue on the head.

Leave Brian lying on his back while the glue dries. 

 When Brian's ready, bend the tail back, into place, and fluff up his mighty mane!

* TIP: For younger makers, leave out the mane cutting and draw on paws instead of cutting them out.

There's also a tutorial to make the little blue gnomes Brian meets on his adventure in space. Using corks and cotton wool! Full step-by-step instructions here.