Showing posts with label Princess Leia. Show all posts
Showing posts with label Princess Leia. Show all posts

4.5.17

Princess Leia - Star Wars craft

Princess Leia - Star Wars craft

Princess Leia joins the crew to celebrate Star Wars day!  She's made like the other figures, but the most important thing to get right was her rather distinctive hair style. Think we cracked it...

You'll need:
Egg carton
Pencil
Ruler
Craft scissors
Nail scissors or similar (optional) Adult supervision required
Paint
Craft glue
Plain paper
Black felt-tip or gel pen
Silver metallic pen
For a lightsaber:
Coloured straw
Black marker pen (like a Sharpie)

1. As with the other figures, roughly cut out two middle cones from the egg box so they're easier to work with. On one, draw a pencil line around the bottom of the cone, just above the bumpy cardboard joins. Cut along the line. This will be the body.

2. The second cone is for the head, and you only need the very top part. Either estimate this, or use a pencil and ruler to mark about 1.5cm (1/2in.) from the top on all sides, join the marks and cut out. A handy way to do this is to cut up two adjacent corners to the pencil line, bend the card back and cut off the flap - it should be easier now to cut along the rest of the line.

(If your cone has a hole in the top, see the tip at the bottom.)

3. For the arms, fold a piece of the egg carton lid in half and draw an arm (roughly about 3cm/or 1in. long) on the fold. Make it a little wider at the unfolded end. Cut out and open up.



4. Either cut the arm strip in half after the painting step (Step 7), and glue the pieces either side of the body, or, with adult supervision, use the nail scissors to make a hole roughly in the middle of one of the arm sides (keep the scissors closed, press down and twist from side to side.)
Once you've made the hole, snip up to the top of the cone and down the other side until the slot looks level. Cut an extra sliver out to widen the gap for the arms. Make sure the slot goes far enough down the body, so when you push the arm strip in, it sits below the top part of the cone (the head will be glued here later). Don't glue any of the pieces together just yet.




5. For her side buns, cut out a strip of plain paper, about 5cm by 8cm (2in.x3in.) and roll it as tightly as you can.



6. Then cut across your roll. Cut a few and make them as thin as you can. Choose two you're happy with, and gently squeeze them back into a rounder shape, letting them unfurl a little. Dab glue on the sides of Princess Leia's head and stick them in place. This might be easier to do with the head sitting on the body. 






7. Painting time. Take the head off and paint the body and arms white.

TIP: As with Darth Vader, place the body on a spare egg carton cone to make painting easier (and less messy!)

Make a skin colour by mixing white with a little red, a touch of yellow and the tiniest dab of blue. Paint one side of the head. When that's touch dry paint on brown hair, painting the buns too. It helps if you draw the outline of the hair on the face first with a brown or black pen before painting. 

Again, put the head on a spare egg carton cone while you're decorating it. 


9. When the paint is dry, use the fine black pen to draw on a face and if you have a silver pen add a belt (see pic above). Glue the head on and if you have cut the arm strip in half, glue them either side.

If you'd like to make a lightsaber or another type of weapon for Princess Leia, have a look at the steps for Luke Skywalker





Tip: If your egg cones have holes in the top, brush glue inside the cones and push a small piece of newspaper up to fill the hole.