24.11.16

Sparkly bird decorations - Christmas crafts


We've been trying out some new Christmas decoration ideas, and I thought I'd share a couple of our favourites over the next few weeks. We'll make glittery birds, Christmas trees and fairies to hang on the tree - and they all use the cone part from the middle of an egg box. As you've probably noticed these crop up quite a lot... they play a leading role in the Nativity we made last time, which is a really fun project because you can keep adding to the scene - does seem to help keep kids interested. Certainly worked with mine!

Glittery birds first, and this is very similar to a previous project - just a few tweaks here and there. It's also a slightly adapted version of the Love birds in Make Your Own Zoo.

You'll need:
egg box/carton
kids' craft scissors
pencil
paint
fine paintbrush
glue
feathers
glitter (optional!)
fine black felt-tip or gel pen
needle and thread
sticky tape
Nail scissors (to make holes - adult supervision needed)

1. Roughly cut a whole cone from the egg carton.


2. Decide how big you want your bird to be and draw a pencil line all the way around the sides of the cone.

3. Cut up two adjacent corners to the line, bend this flap back and cut it off. It's now easier to cut along the rest of the line. Neaten up the edges so the sides are even and the cone sits flat.


4. Paint the cone any colour you like. When it's dry, use the nail scissors to pierce a hole through the top (if there isn't one there already) - keep the scissors closed, press down and twist from side to side. Make another hole about a third of the way up one side (for the tail feathers).


5. Thread a needle with a good length of thread - we used gold, but use whatever you have - and push the needle up through the cone and through the hole, then back down through the hole, leaving a loop for hanging your bird. Use sticky tape to stick down the two strands of thread inside the cone (just make sure not to stick it to the side with the tail feather hole). Trim the thread ends.


6. On the side opposite the tail feather hole, use the fine black pen to draw eyes near the top of the cone. Keep them small and quite close together.


7. Brush some glue inside the cone behind the two holes and choose your feathers - big and showy for the the tail feathers, use several if you want - and short and fluffy for the head plume.


8 Brush a little glue on the sides and stick down two similar sized feathers for the wings. If your feathers are too big, trim them or cut the top off larger ones to get two pieces that look the same, before gluing them on.

9. For the beak, use a fine paintbrush to dab a small blob of yellow paint just below the eyes.


8 For some sparkle, brush glue on the front of your bird and sprinkle over some glitter. Shake off the excess. A good way to save glitter is to do the sprinkling over a paper plate, then bend the plate in the middle to catch the glitter in the fold, and funnel it back into a container.




Next time Christmas trees!


Joining in with the lovely Happiness is Homemade link party.