19.5.16

Birds of a feather - easy egg carton craft


I'm really fond of these little birds, and they're easy to make.

You'll need:
1 egg box
Small feathers
PVA/craft glue
Nail scissors (to make holes)
paint
fine black felt tip pen

1. First, roughly cut a cone from the egg box - this makes it easier to work with. We measured 3cm from the top and marked each side (make it any size you want though). Join the marks and cut along the line. Measuring helps keep the cone base nice and even.



2.  Paint the cone any colour you like.
Putting it on your finger is a handy way to paint the bottom edges.


3. When dry, choose the side you want for the front and with a fine black felt-tip or gel pen draw eyes close to the top.


4. Use the nail scissors to make a small hole in the top and one at the back (about 1cm from the bottom). Keep the scissors closed, press down and twist carefully from side to side. If you're making the birds with kids, always supervise this part, or make the holes yourself.


5. Dab some glue behind the holes and push a suitable feather in each one - small and fluffy for the head plume and a little longer and showy for the tail feathers. We got these lovely colourful speckled ones from The Works, but you can buy them online too.


6. For the wings, you'll need 2 little fluffy feathers or if none are small enough, cut pieces from the top of a larger one. Brush a very thin layer of glue on the sides (so it doesn't stick through the features) and stick them down.



7. Just below the eyes dot a small but thick blob of yellow paint with a fine paintbrush, and leave to dry.


OR, if you'd like a sticky-out beak, cut a thin strip of cereal box card, colour it with a yellow felt tip, snip a V at one end and cut off about a cm.
Make a horizontal slot below the eyes with the nails scissors (keep closed, press and twist gently). Dab a little glue behind the slot and push the beak into place.